SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Changing bars to biltwell frisco's
/cgi-bin/YaBB.pl?num=1468285579

Message started by Lonewolves on 07/11/16 at 18:05:56

Title: Changing bars to biltwell frisco's
Post by Lonewolves on 07/11/16 at 18:05:56

swapping my drag bars on my 86' LS650 savage to Biltwell Frisco bars - they're on the stock risers and all my cables had no trouble reaching the 7" rise besides the Brake Hose / line -

Off hand any recommendations on the best place to get the replacement cable / how long and what specifics I'll need?

Just wondering if anyone has been in the same predicament and has some helpful advice

Title: Re: Changing bars to biltwell frisco's
Post by KennyG on 07/11/16 at 20:30:39

Wolves,

If you have Kubota Dealer near you check with them. The one where I live will make up a brake hose any length that you want, they are reasonable on price.

Talk to them first and then take the hose with all of the fittings into their shop they will make the new one while you wait.

Kenny G