SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Ape hanger help /cgi-bin/YaBB.pl?num=1467650288 Message started by Graven754 on 07/04/16 at 09:38:08 |
Title: Ape hanger help Post by Graven754 on 07/04/16 at 09:38:08 Installing 12 inch apes and I'm planning to put the roll pins in. Does it matter what size roll pins? |
Title: Re: Ape hanger help Post by WD on 07/04/16 at 21:20:44 6E5B485F4C471E1C1D290 wrote:
I usually end up with whatever stainless steel sheetmetal screw needs a 1/8" pilot hole. Start small, the hole will eventually become an ellipse... Savage riser caps are pot metal, vibrate like crazy, the screw or roll pin wins that battle every time. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |