SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Champion 809
/cgi-bin/YaBB.pl?num=1466208286

Message started by Redryder652 on 06/17/16 at 17:04:46

Title: Champion 809
Post by Redryder652 on 06/17/16 at 17:04:46

Has anyone had any luck with a chapion 809? Its not a 8809 Powersport plug but a 809 copper plus. It was the only one in stock.

Title: Re: Champion 809
Post by Kris01 on 06/17/16 at 21:09:57

I don't think that's a recommended part number.

Title: Re: Champion 809
Post by Kris01 on 06/17/16 at 21:14:40

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1107534689

Nevermind. I guess it might be correct.

Title: Re: Champion 809
Post by mastercarstech on 07/02/16 at 10:36:41

How about a Champion 810 (RA8HC)?  Asked my parts guy for a NGK DP7EA-9. which is what my Clymer says is the recommended plug for a hotter heat range and this is what he said it crossed to? It's a 5/8 plug instead of the 3/4 and it has the normal automotive contact on top which the original doesnt, no biggy that can be removed. I know people have been changing to the iridium plug, what's a good number for that? Everyone of the parts guys I've talked have no answer about that. Thanks!

Title: Re: Champion 809
Post by Kris01 on 07/02/16 at 17:30:23

5/8" threads or nut? If the threads don't match then you know automatically it's the wrong plug.

Title: Re: Champion 809
Post by verslagen1 on 07/02/16 at 19:45:01


0D342F357677460 wrote:
5/8" threads or nut? If the threads don't match then you know automatically it's the wrong plug.


5/8" nut, threads are metric.

Title: Re: Champion 809
Post by mastercarstech on 07/02/16 at 20:03:50

Yes, what Versy said. Sorry, I should have clarified. Threads look the same.

Title: Re: Champion 809
Post by Kris01 on 07/03/16 at 08:53:19

A few specs on the 809:


   Thread Size: 12mm
   Seat Type: Gasket
   Resistor: Yes
   Resistor Type: SAC9
   Reach: 19mm (3/4")
   Hex Size: 5/8" (16mm)
   Terminal Type: Removable Nut
   Gap: .024" (0.6mm)


Center Electrode
   Material: Nickel
   Type: Standard
   Size: 2.0mm
   Projection: Non-Projected

Specifications
   Torque Specs: Cast Iron: 10-18 lb. ft. Aluminum: 10-18 lb. ft.
   Brand: Champion
   Heat Range: 6


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.