SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Turn signal beeper
/cgi-bin/YaBB.pl?num=1466122869

Message started by SugarBoogers on 06/16/16 at 17:21:09

Title: Turn signal beeper
Post by SugarBoogers on 06/16/16 at 17:21:09

I need a turn signal beeper really bad. Ima gonna get hit due to always leaving it on after a turn.

Title: Re: Turn signal beeper
Post by Kris01 on 06/16/16 at 17:53:48

You ain't the only one with that problem! :-[

Title: Re: Turn signal beeper
Post by justin_o_guy2 on 06/16/16 at 18:10:29

Ima gonna get hit due to always leaving it on after a turn.

Believing that should be enough to keep you alert.
You're smart enough to turn it on..

Title: Re: Turn signal beeper
Post by Dave on 06/17/16 at 03:56:43

Here is the link to the Table of Contents in the Technical Section. Go down to the "lights" section, and there are a couple of threads on beeping turn signals.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181745927

Title: Re: Turn signal beeper
Post by oldNslow on 06/17/16 at 05:21:26

Perfect excuse to just go ahead and buy a new Harley :D

Title: Re: Turn signal beeper
Post by stewmills on 06/17/16 at 06:56:22

You can also wire up an LED if you make it visible and you don't want the loud beeper. Wires up the same way, it's just a light versus a beeper.

See this thread for a brief discussion and some images on LEDs.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1460570532/30#30

Here is a short video of my LED in daylight. I have since added a small "shield" over it to make it more visible to me in the bright mid-day sun.

http://tinypic.com/player.php?v=2n6fbeh&s=9

Title: Re: Turn signal beeper
Post by old_rider on 06/18/16 at 09:45:28

Here is a video of what I did......

[media]http://www.youtube.com/watch?v=nS8RPngVjrM [/media]

Title: Re: Turn signal beeper
Post by stewmills on 06/20/16 at 06:48:19

Old Rider's instructions are spot on. That's what I used to do mine. I robbed a couple of electrical prongs from an old trailer light connector and they fit down into the blinker relay thingy just perfect.

Title: Re: Turn signal beeper
Post by Todd James on 06/20/16 at 21:38:18

If you don't have electrical prongs to put on the ends of
the wires, you can just thread the wires into the connector.

Here's the link to the Tech Section thread showing my
installation 4 years ago. It's still working great.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1285772416/0

Look at Repy numbers 14 and 19.