SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Dyna Glide FXD1340 Muffler /cgi-bin/YaBB.pl?num=1465362575 Message started by hockmanjosh on 06/07/16 at 22:09:35 |
Title: Dyna Glide FXD1340 Muffler Post by hockmanjosh on 06/07/16 at 22:09:35 Will a HD Dyna Glide FXD1340 muffler fit on the savage? |
Title: Re: Dyna Glide FXD1340 Muffler Post by stewmills on 06/08/16 at 08:10:02 Not sure about that model, but here's the Harley guide in the tech section. The big thing you need to pay attention to is the mounting bolt locations, but I'd recommend reading the complete guide for all tips, etc. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1298689417 |
Title: Re: Dyna Glide FXD1340 Muffler Post by Serowbot on 06/08/16 at 08:25:22 Anything fits if you have a big enough hammer... :-? You can't go just by model... Newer mufflers have crossover tubes... they're ugly, and a PItA to block off. They also have primitive Cats at the inlet... they'll still work, but will discolor and run very hot... Read my guide,.. and add it to your knowledge, then eyeball that muffy... If it looks like a duck, and it quacks like a duck... you can make it fit... |
Title: Re: Dyna Glide FXD1340 Muffler Post by hockmanjosh on 06/08/16 at 14:45:06 Ok, so this thing was a breeze! It was as if this model was made for the savage! I made a spacer out of a aluminum can (like others have done on here). Used the HD clamp that came with the muffler, not issues at all. Sounds extremely mean!!! >:( |
Title: Re: Dyna Glide FXD1340 Muffler Post by Serowbot on 06/08/16 at 14:52:17 I love happy endings... ;D |
Title: Re: Dyna Glide FXD1340 Muffler Post by Kris01 on 06/08/16 at 19:36:41 Pics or it didn't happen! ;D |
Title: Re: Dyna Glide FXD1340 Muffler Post by stewmills on 06/09/16 at 09:57:07 7563746971646972060 wrote:
TMI! TMI! |
Title: Re: Dyna Glide FXD1340 Muffler Post by hockmanjosh on 06/09/16 at 10:42:18 Here's a pic. 447D667C3F3E0F0 wrote:
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |