|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Cast front wheel tubeless /cgi-bin/YaBB.pl?num=1464806196 Message started by SugarBoogers on 06/01/16 at 11:36:36 |
|
Title: Cast front wheel tubeless Post by SugarBoogers on 06/01/16 at 11:36:36 Does an XS650 cast front wheel fit or be made to fit? |
|
Title: Re: Cast front wheel tubeless Post by verslagen1 on 06/01/16 at 12:09:37 The front and rear for the xs650 might be the same size. If you can match the disc size and offset by hook or crook then the front can be done. next would be the rear which will be a challenge that I'll leave to you. |
|
Title: Re: Cast front wheel tubeless Post by verslagen1 on 06/01/16 at 12:41:23 I have used the GS wheel sets. The axles are the same. The front disc from a GS450 can be adapted to the savage. The savage rear drum hub fits in certain models of the GS. See http://suzukisavage.com/cgi-bin/YaBB.pl?num=1366486692 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1205292181 |
|
Title: Re: Cast front wheel tubeless Post by SugarBoogers on 06/01/16 at 17:57:07 Well I like the belt drive so I'd leave that alone unless the rear cog could be fitted to a cast wheel somehow... :-? Maybe an adapter would mate the cog to where the sprocket mounts. 514255544B4640424916270 wrote:
|
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |