SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Turn signal mod
/cgi-bin/YaBB.pl?num=1461517640

Message started by verslagen1 on 04/24/16 at 10:07:20

Title: Turn signal mod
Post by verslagen1 on 04/24/16 at 10:07:20

The SmartTurnSignal system and the piezo/LED reminder mods got me thinking...

I can see the back of the stock lollypops and at night can see them blinking at the top.

Why not improve on that and open a hole at the back thru the reflector and insert a lens so you can see it from the back?

If you can find the right lens with a brim you can sandwich it between the housing and reflector.

http://ecx.images-amazon.com/images/I/31IQ8PknwzL.jpg

Title: Re: Turn signal mod
Post by KennyG on 04/24/16 at 11:35:47

Verslagen,

That looks like a good idea.

Where did you purchase the lenses?

Kenny G

Title: Re: Turn signal mod
Post by thumperclone on 04/24/16 at 11:40:07

if I get your gist
a small (size of a match head) stick on w/p yellow led on top of the housing

Title: Re: Turn signal mod
Post by verslagen1 on 04/24/16 at 12:21:43

These are from amazon, but there are many...

http://www.amazon.com/Light-Pipes-Transparent-length-piece/dp/B005T67H4W/ref=sr_1_2?ie=UTF8&qid=1461515288&sr=8-2&keywords=panel+light+pipe+red

For LED's 5mm in diameter, the lens are 9mm.

What I'm really looking for is a lens about 1" in diameter with a brim that can be trapped between the housing and reflector.