SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Did a hockey puck mod
/cgi-bin/YaBB.pl?num=1461363649

Message started by copterdoc on 04/22/16 at 15:20:14

Title: Did a hockey puck mod
Post by copterdoc on 04/22/16 at 15:20:14

Ayden approves of the big brake and hockey puck mod.

Title: Re: Did a hockey puck mod
Post by Serowbot on 04/22/16 at 15:23:23

I approve of that cool upswept pipe... Neat!... 8-)

Title: Re: Did a hockey puck mod
Post by copterdoc on 04/22/16 at 15:43:51

Thanks Bitwell cannon on the back. Love the sound.

Title: Re: Did a hockey puck mod
Post by DesertRat on 04/22/16 at 15:51:52

SWEET bike ... agreed with the exhaust, but those Red Wing hammerhead shocks are b!tchin'

and cool car ... 8-)

Title: Re: Did a hockey puck mod
Post by copterdoc on 04/22/16 at 16:05:57

Thanks, The Redwings were the super score of the build. Not repops, New old stock in the box! Car is a 1970 chevelle SS 454. had it 30+ years, driver not garage queen.

Title: Re: Did a hockey puck mod
Post by KennyG on 04/22/16 at 17:44:34

Doc,

Are the knee pads on the tank from Ryca?

Kenny G

Title: Re: Did a hockey puck mod
Post by copterdoc on 04/22/16 at 19:42:16

Yes the small set

Title: Re: Did a hockey puck mod
Post by zipidachimp on 04/23/16 at 01:23:13

How long are the redwings? with 12.5" shocks, I needed 2 pucks or the bike was over too far.

Title: Re: Did a hockey puck mod
Post by copterdoc on 04/23/16 at 05:50:03

Mine are actually KMX-360's, 14 inch. A lot of people here said that you could not run that length. I do with no issues. I tack welded a washer as a shim to raise the bike a little also.

Title: Re: Did a hockey puck mod
Post by zipidachimp on 04/23/16 at 12:22:07

wow! 14", I thought I was high. ps: luv the wheels on the chevelle, 15"?.

Title: Re: Did a hockey puck mod
Post by copterdoc on 04/24/16 at 06:54:08

No 17's. MB old school High performance hankooks and C5 corvette conversion Big rotors and calipers disc conversion coming.