|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> indercators /cgi-bin/YaBB.pl?num=1460375214 Message started by egavas420 on 04/11/16 at 04:46:54 |
|
Title: indercators Post by egavas420 on 04/11/16 at 04:46:54 my new indercators dont blink many have wired incorrectly they are not led any ideas or links, new to bikes first big build |
|
Title: Re: indercators Post by justin_o_guy2 on 04/11/16 at 04:58:49 686C7E75622F292B1B0 wrote:
many have wired incorrectly Probably meant may have wired incorrectly And, considering the New to bikes First big build I would have a hard time arguing with your best guess. Probably wired wrong. Did the old ones work? |
|
Title: Re: indercators Post by Dave on 04/11/16 at 05:14:20 Are the new lights LED rather than filament bulbs? If so....you will need to change the flashing unit to a solid state flasher. You need a "2-wire" solid state flasher....you can get one at just about any auto store that is universal - you will probably have to modify the wires to fit the flasher unit as the stock one has a clip that is specific to that flasher. |
|
Title: Re: indercators Post by justin_o_guy2 on 04/11/16 at 05:38:20 they are not led you have any other ideas you'll just have to ask if it is possible and don't forget to punctuate |
|
Title: Re: indercators Post by Kris01 on 04/11/16 at 16:05:33 Tell us how you wired them. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |