SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> 652cc - New badges /cgi-bin/YaBB.pl?num=1459795968 Message started by DesertRat on 04/04/16 at 11:52:47 |
Title: 652cc - New badges Post by DesertRat on 04/04/16 at 11:52:47 new badges came in, finally ... wished they had lowercase "cc" and still need to adjust the kerning before application 652cc |
Title: Re: 652cc - New badges Post by Dave on 04/04/16 at 13:06:43 You really need to consider going to the 95mm Wiseco. Your bike would look so much more "badass" with 666 on it! >:( |
Title: Re: 652cc - New badges Post by DesertRat on 04/04/16 at 15:57:29 4B707D6A7B776C6A7179746B180 wrote:
LOL ;D ;D ;D I don't vote "devil", Dave. I normally vote "G*d" or zombies ;) but that would be cool on someones bike ... *not into the skulls and devils or iron crosses either, the majority of which has become passé in bike themes ... :-/ |
Title: Re: 652cc - New badges Post by KennyG on 04/04/16 at 16:52:17 Rat, I like your new badges. I hope you will post a pic after you have them on the bike. Kenny G |
Title: Re: 652cc - New badges Post by russ on 04/04/16 at 18:47:43 wait , that's my lucky number . |
Title: Re: 652cc - New badges Post by russ on 04/04/16 at 18:49:49 tis passe . lookin for subtle. can't help my lucky numb is what it is . |
Title: Re: 652cc - New badges Post by DesertRat on 04/04/16 at 19:28:11 143A311C2D3E2C375F0 wrote:
Thanks Kenny. I'm still debating on the location. Either on the side covers where the old "S40" badges were or low on the tank sides. Did a quick mock up and still non-commital. ;D |
Title: Re: 652cc - New badges Post by gizzo on 04/05/16 at 00:13:25 Cool. Now I know what kerning is. If I were to put badges or decals on, I'd do a "6 1/2 " badge on the side cover. Just to be obscure. But I won't. |
Title: Re: 652cc - New badges Post by DesertRat on 04/05/16 at 07:23:33 so others are in the loop like GIZZO is now - KERNING https://en.wikipedia.org/wiki/Kerning http://https://upload.wikimedia.org/wikipedia/commons/thumb/d/da/Kerning_EN.svg/230px-Kerning_EN.svg.png |
Title: Re: 652cc - New badges Post by KennyG on 04/05/16 at 07:36:13 Rat, I don't see anything on your badges that can be kearned. Take a pic with a tape measure alongside the badges so we can get some idea of the scale. Are you planning on selling the badges? Kenny G |
Title: Re: 652cc - New badges Post by DesertRat on 04/05/16 at 07:36:32 475D595B5A64554640465D505351340 wrote:
not sure how the 6 1/2" badge* would fit on the side covers. *See attached diagram |
Title: Re: 652cc - New badges Post by DesertRat on 04/05/16 at 07:45:43 Kenny, the spacing between the letters (kerning) is too wide for these proportional block letters for my tastes. It is also off slightly with the "CC" spacing. |
Title: Re: 652cc - New badges Post by DesertRat on 04/05/16 at 07:46:46 one more for perspective on spacing - |
Title: Re: 652cc - New badges Post by verslagen1 on 04/05/16 at 09:28:54 650cc=6.5dL=22oz=1.37pt now that's obscure |
Title: Re: 652cc - New badges Post by Serowbot on 04/05/16 at 09:44:35 22oz. just don't sound as impressive... :-/ |
Title: Re: 652cc - New badges Post by HovisPresley on 04/05/16 at 09:52:58 6375627F67727F64100 wrote:
Unless it's 'herbal' :o ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |