SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Mirrors
/cgi-bin/YaBB.pl?num=1458788040

Message started by 1100dan on 03/23/16 at 19:54:00

Title: Mirrors
Post by 1100dan on 03/23/16 at 19:54:00

What mirrors have you guys used to replace the stock ones? I know it's personal preference, but I'm looking something that complements the looks of the savage. Thanks in advance..

Title: Re: Mirrors
Post by Rayven on 04/20/16 at 10:04:47

I bought a pair of small low profile square black Harley mirrors, but I had to get adapters (which were like $3 for the set online) to make them fit into the stock mounts. I don't have any pictures of them...

They are similar to these, but a little smaller.
http://www.ebay.com/itm/DAYTONA-Harley-Davidson-Short-Stem-Mirror-Square-Type-for-Right-/152054928909?hash=item23672e160d:g:9Y8AAOSw5ZBWMUYN&vxp=mtr

Hope that helps!

Title: Re: Mirrors
Post by 1100dan on 04/23/16 at 14:32:27

Thanks for the replay. I know the mirror question is subjective but I thought I'd throw it out there anyway. Apparently I've gotten only your response so thank you for that......anyway, I did end up ordering a set of Lowbrow custom spot mirrors. I have them on two of my other bikes and I like the less obtrusive look. The rabbit ears that came stock were a little much for me. I will have to drill and tap the mirror stems to adopt to the Savage, no big deal as I had to also.do it for the other bikes. Enjoy your bike.....

Title: Re: Mirrors
Post by Serowbot on 04/23/16 at 14:39:56

Bar-ends are about $15 on Ebay,,, good wide-angle view, not much vibration...

http://i600.photobucket.com/albums/tt82/serowbot/b_zpswsq0n9qj.jpg

Title: Re: Mirrors
Post by copterdoc on 04/23/16 at 14:49:42

Ditto on the bar ends.

Title: Re: Mirrors
Post by DesertRat on 04/23/16 at 15:41:30

7D6B7C61796C617A0E0 wrote:

Bar-ends are about $15 on Ebay,,, good wide-angle view, not much vibration...

http://i600.photobucket.com/albums/tt82/serowbot/b_zpswsq0n9qj.jpg

those are NOT the stock bars, right?

Title: Re: Mirrors
Post by Serowbot on 04/23/16 at 15:58:38

Yeah,... sorry,.. The stock bars have nasty welded in weights that won't allow the bar-ends to mount...

So long ago, I forgot... :-?

Title: Re: Mirrors
Post by DesertRat on 04/23/16 at 16:08:50

yeah, that's the issue I've had for months now. Bought and returned so many bar end mirror sets, I gave up trying to find any that will fit ...

Title: Re: Mirrors
Post by justin_o_guy2 on 04/23/16 at 22:36:10

Why can't the welded in weight be drilled and tapped and screw a mirror in?

Title: Re: Mirrors
Post by norm92de on 04/23/16 at 23:16:36

I've done that, it works very well. Locktite may be needed to stop them vibrating loose.

By the way Serobot cool looking
Zuki! :)