|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> ryca rr-1 header and shorty muffler /cgi-bin/YaBB.pl?num=1458588617 Message started by JustinB on 03/21/16 at 12:30:17 |
|
Title: ryca rr-1 header and shorty muffler Post by JustinB on 03/21/16 at 12:30:17 just wondering if any of you have run it or are running it? how you like it? i love the look but am sceptical on how hot it gets on the leg. obviously it would be heat wrapped but it still makes me a bit nervous being that close to the leg. any input is greatly appreciated. thanks! |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Dave on 03/21/16 at 12:35:27 Questions about your Savage go in this Rubber Side Down section, the Technical Section is reserved for proven "How To" topics. The RYCA shorty is an "EMGO".......if you are talking about the shorty megaphone. They are obnoxiously loud, and your neighbors will learn to hate you. They can be modified to sound a bit better by adding some interior baffles to turn it into a muffler - currently it is a glass pack with very little "glass packed" in the muffler. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by justin_o_guy2 on 03/21/16 at 12:57:58 The real Go To swap is the Dyna. Looks great, sounds good, weighs a lot less, Cheap, available and does a good job. STILL sounds autobiographical.. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by JustinB on 03/21/16 at 14:17:28 talking about this one http://shop.rycamotors.com/short_reverse_cone_muffler_chrome.html |
|
Title: Re: ryca rr-1 header and shorty muffler Post by JustinB on 03/21/16 at 14:19:44 is that one obnoxiously loud aswell? they have the option for it to be packed aswell. dont want it too quiet though. :D |
|
Title: Re: ryca rr-1 header and shorty muffler Post by justin_o_guy2 on 03/21/16 at 14:48:13 How does a Harley sound? Cut one Puhtatuh Out. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Dave on 03/21/16 at 15:39:40 784741465B5C70320 wrote:
Yep....those are really loud. The change that RYCA makes is to add a "crumb cub" from a sink strainer at the outlet of the muffler. It helps - but it doesn't help enough. One of the members modified his to have an extra baffle plate inside...his change is in the Bike Build Section, for a Cafe bike.....but I can't remember which one. This video replicates the sound....but not the painful volume. https://www.youtube.com/watch?v=eiiUEjO8znY Here is the packing and crumb cup mod: https://www.youtube.com/watch?v=SIelY9gMqX0 |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Dave on 03/22/16 at 04:49:40 Found it....it was Gyrobob. Go to reply no. 277 in this thread. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304722902/270 |
|
Title: Re: ryca rr-1 header and shorty muffler Post by justin_o_guy2 on 03/22/16 at 11:35:51 My Supertrapp came with a warning to Clean Thoroughly, else the manufacturing lubricants would blue it and their warranty for not bluing would be void. Dawn dish washing liquid rips oil off. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Philmh on 03/22/16 at 18:33:47 I just cut the stock header on the second bend where it turns parallel to the ground and welded a 45 degree turn out. Really brings out the sound and blows blue flames out. Its really a thing of beauty! |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 03/22/16 at 18:53:19 Here is my Leftside wrap around with a biltwell cannon. Love the sound and is well out of the way. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Art Webb on 03/22/16 at 21:09:42 I love that bike copterdoc but every time I see it on the side stand I cringe thought about lengthening the stand any? probably it looks more leaned over than it really is |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Kruzader on 03/22/16 at 21:45:12 Copper where or how did you get that cafe racer back and seat? |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 03/23/16 at 16:52:07 Lean doesn't bother me it's solid. Really never thought about it till you brought it up....... Thanks for that. As for the seat. Part of the RYCA kit. It's one of the early ones, about 5 years old now, but I don't think they changed. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by JustinB on 03/25/16 at 04:27:53 copterdoc how hot does that get on a decent ride? say a few hr ride each way day trip kind of thing. leg start to feel the heat after a while? |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 03/25/16 at 06:27:33 Not as hot as you might think. I have DEI exhaust wrap in the pipe with an aluminum shield offset about 1/4 inch off the pipe, 2 attach points. The wrap is very hot about half way back (but not flesh searing hot) then cools a little. The shield must get enough airflow or the aluminum dissipates the heat very well, only very warm to the touch, not burning hot. All this based on about an hour long ride, but I think it's most likely up to full temp after 5-10 minutes max. http://www.jegs.com/i/DEI/186/010129/10002/-1?CAWELAID=1710629487&CAGPSPN=pla&catargetid=230006180003481964&cadevice=t&gclid=COHC87b228sCFQEGaQod9LUMNA |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 03/25/16 at 06:31:26 I've also recently made myself some new heat shields to try out. A little wider and longer with lightning holes to help dissipate more heat. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by justin_o_guy2 on 03/25/16 at 13:04:20 How fast do you have to be going before the holes start shooting lightning out? |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 03/25/16 at 13:41:37 Sorry, left out the "e". https://en.wikipedia.org/wiki/Lightening_holes |
|
Title: Re: ryca rr-1 header and shorty muffler Post by justin_o_guy2 on 03/25/16 at 15:59:30 Well, dang, I was thinking someone had stumbled upon a new and exciting modification. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 03/25/16 at 18:55:08 Sorry I'm a helicopter mechanic, hence "copterdoc". Part of my vocabulary. ;D |
|
Title: Re: ryca rr-1 header and shorty muffler Post by daveupstate on 04/25/16 at 06:18:21 232F30342532242F23400 wrote:
Thinking of getting a biltwell mini muffler, what is your carb setup with that beast? |
|
Title: Re: ryca rr-1 header and shorty muffler Post by Gary_in_NJ on 04/25/16 at 07:50:43 I'm using RYCA's Long Reverse muffler on my cafe. It's quiet but has a nice sound/tone. |
|
Title: Re: ryca rr-1 header and shorty muffler Post by copterdoc on 04/25/16 at 11:36:00 Dave, cone filter with elbow. White spacer mod. 152.5 main jet 55 pilot jet |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |