SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> A question for Ryca kit owners?
/cgi-bin/YaBB.pl?num=1445126766

Message started by trevorw on 10/17/15 at 17:06:06

Title: A question for Ryca kit owners?
Post by trevorw on 10/17/15 at 17:06:06

Hi guys,

So I am working on my bike and due to another chosen one being added to the family funds are tight so my goal on this build is to build as much as I can myself. I am doing a similar build to the Ryca bike and I was wondering if anyone that has purchased the kit would mind sharing some dimensions?
I am building my own rear set bracket and need to know length of the square tube and if possible some measurements for the part where the rear set actually mounts.

The other thing I am looking for is the metal seat pan dimensions.

If anyone has some spare time and would not mind sending those off to me I would greatly appreciate it! I will be starting a build thread soon!

Title: Re: A question for Ryca kit owners?
Post by BSTON on 10/19/15 at 11:09:44

I'm supposed to be getting my kit in a couple weeks. I can help you out then if no one else chimes in before that.

Title: Re: A question for Ryca kit owners?
Post by trevorw on 10/19/15 at 17:30:22

That would be great thanks!
I actually started on my seat pan today, I decided I am just going to wing it and see what I can come up with but would really appreciate the rear set dimensions!

Title: Re: A question for Ryca kit owners?
Post by v-pilot on 10/19/15 at 18:24:00

Hey Trev, the pan is 334mm long by 156mm wide with a 17mm high edge. The welded nuts are 72 mm center to center and 25mm from the end to center and 41mm from edge to center. The front mount is 30mm high by 153mm across and 30mm wide where the slotted holes are. The slots are 60mm center too center, 20mm long and 8mm across. They are 46mm from the edge and 3mm from the front. Pic is the top...there is a slight curve in the front by the three spot welds

Title: Re: A question for Ryca kit owners?
Post by v-pilot on 10/19/15 at 18:24:40

underside

Title: Re: A question for Ryca kit owners?
Post by v-pilot on 10/19/15 at 18:27:24

side

Title: Re: A question for Ryca kit owners?
Post by v-pilot on 10/19/15 at 18:28:43

front mount

Title: Re: A question for Ryca kit owners?
Post by v-pilot on 10/19/15 at 18:29:24

front mount side view

Title: Re: A question for Ryca kit owners?
Post by trevorw on 10/21/15 at 11:09:48

3C673A2326253E4A0 wrote:

front mount side view

Awesome, thank you so much, this helps me out a great deal!