SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Oil Drain Plug - Crush washer or Gasket?
/cgi-bin/YaBB.pl?num=1443451623

Message started by DesertRat on 09/28/15 at 07:47:03

Title: Oil Drain Plug - Crush washer or Gasket?
Post by DesertRat on 09/28/15 at 07:47:03

Can't find data for a washer or gasket on the oil drain plug. Anyone know or point me in the right direction?

Title: Re: Oil Drain Plug - Crush washer or Gasket?
Post by verslagen1 on 09/28/15 at 08:02:24

gasket oil level plug
09168-12002

any soft metal gasket that fits the plug should work.

Title: Re: Oil Drain Plug - Crush washer or Gasket?
Post by DesertRat on 09/28/15 at 08:10:41

thanks

Title: Re: Oil Drain Plug - Crush washer or Gasket?
Post by justin_o_guy2 on 09/28/15 at 10:56:19

Any right fitting copper or aluminum will do. I bought a few, and a few filters, o rings, so I wouldn't need to go to town for some reason.
I always have gallon jugs of oil. I'd rather have a few dollars in o rings and washers I don't need than be in an oil change and hafta go shopping.