SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front Pulley /cgi-bin/YaBB.pl?num=1439643415 Message started by pg on 08/15/15 at 05:56:55 |
Title: Front Pulley Post by pg on 08/15/15 at 05:56:55 Gents: How can I remove the front pulley when the belt is not attached? I'm sure there is a significant amount of torque on the 32 mm nut. Incidentally, I'm in the process of installing a new belt. Thanks. Best regards, |
Title: Re: Front Pulley Post by justin_o_guy2 on 08/15/15 at 06:46:19 Use the old belt, clamped together below, with a rod or straight wall socket under the belt, up top, so it gets in a bind against the motor. An impact is a handy tool. |
Title: Re: Front Pulley Post by Dave on 08/15/15 at 07:34:33 We had this discussion a month ago.....this should help. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1437577357 |
Title: Re: Front Pulley Post by pg on 08/15/15 at 10:23:45 Thanks JOG & Dave, I got it loose. [smiley=thumbup.gif] Best regards, |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |