SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Bolt Size /cgi-bin/YaBB.pl?num=1438958602 Message started by savagerider87 on 08/07/15 at 07:43:22 |
Title: Bolt Size Post by savagerider87 on 08/07/15 at 07:43:22 What is the thread size of the two tank bolts? |
Title: Re: Bolt Size Post by Dave on 08/07/15 at 07:53:52 776572656361766D6061763C33040 wrote:
They are 6 x 1.0 thread size....10 mm hex size. |
Title: Re: Bolt Size Post by FerousBastard on 08/07/15 at 07:56:33 Just measure with a caliper or similar, should be either M5 or M6 (5mm or 6mm) if memory serves correct. At least on the EU models. |
Title: Re: Bolt Size Post by justin_o_guy2 on 08/07/15 at 08:13:46 If you have one, haul it to the store. If not, bummer. I have been seen swiping obviously too short or long bolts from other places, then, getting an idea, go buy bolts.. yeah, I wound up with stuff left over, spent a few bucks, but got home with the right stuff. But, asking here is great, some of these guys either know or can look it up. |
Title: Re: Bolt Size Post by chzeckmate on 08/08/15 at 01:19:31 Dave is right. They are M6. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |