|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Please Help! /cgi-bin/YaBB.pl?num=1438803601 Message started by Apstanfill on 08/05/15 at 12:40:01 |
|
Title: Please Help! Post by Apstanfill on 08/05/15 at 12:40:01 I'm very new to the Savage/Motor cycle world, and I'm trying to find a front brake cable for a '96 Savage with 12" ape hangers. Can anyone help point me in the direction of who to get ahold of? I found a place that can make it, but they need to know what type of fittings are on it, and I don't know. Thanks in advance! |
|
Title: Re: Please Help! Post by verslagen1 on 08/05/15 at 12:46:53 You have 10mm banjo fittings straight fittings would be acceptable but the stock fitting is bent on 1 end. and they are about 90° clocked from end to end. |
|
Title: Re: Things every savage newb should know... Post by Apstanfill on 08/05/15 at 12:36:36 What type of fittings are used on the Savage's front brake? I'm trying to get a custom front brake to facilitate 12" ape hangers, but I don't know what the fittings are called. Or, does anyone know where I can order one? |
|
Title: Re: Things every savage newb should know... Post by verslagen1 on 08/05/15 at 13:03:48 605245525456614A575641020A0B07330 wrote:
The stock lines will handle about an 8" mini ape, so about a 4" over stock hose should work. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1155017333 |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |