SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Jardine Rumbler Bolt /cgi-bin/YaBB.pl?num=1434986405 Message started by Coaxial on 06/22/15 at 08:20:05 |
Title: Jardine Rumbler Bolt Post by Coaxial on 06/22/15 at 08:20:05 Hey Guys! Does anyone here know what size the Jardine Rumbler mounting bolts are? Mine seem to have vibrated off. Do you guys think its Metric or Imperial? |
Title: Re: Jardine Rumbler Bolt Post by justin_o_guy2 on 06/22/15 at 11:23:55 Is there a nut welded somewhere you need to match? |
Title: Re: Jardine Rumbler Bolt Post by Coaxial on 06/22/15 at 19:13:29 Unfortunately no. I called Jardine, they said 3/8ths bolt. I tried that. Didnt quite work out. It wouldnt thread. |
Title: Re: Jardine Rumbler Bolt Post by justin_o_guy2 on 06/22/15 at 23:21:20 So, yes there IS a nut attached to the muffler? |
Title: Re: Jardine Rumbler Bolt Post by Coaxial on 06/23/15 at 10:42:21 Oh sorry I misunderstood.. Yes there is a round threaded "nut" |
Title: Re: Jardine Rumbler Bolt Post by justin_o_guy2 on 06/23/15 at 15:14:48 If nobody really knows, Okay,, they said, 3/8, you say no. Well, was it too big? Explain what is happening, bore me with details, tools, experience, Got any bolts laying around? Got a dial caliper? If nothing else, get an idea, buy a coupla bolts, metric, standard.. Theres more than one thread pitch one 3/8 bolts, did it go in but wouldn't turn? |
Title: Re: Jardine Rumbler Bolt Post by Dave on 06/24/15 at 03:17:15 And....bolts can come in different thread pitches. A lot of bolts used in clamps are fine thread. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |