SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> My savage tracker....ing
/cgi-bin/YaBB.pl?num=1433580910

Message started by Superxin on 06/06/15 at 01:54:58

Title: My savage tracker....ing
Post by Superxin on 06/06/15 at 01:54:58

I don' know it's tracker or caferacer........
hhhhaa
maybe it's cafertracker.
sorry .my english is very bad.
the tank is my firends diy.
the Seat is my own production

Title: Re: My savage tracker....ing
Post by strang on 06/06/15 at 03:45:28

looks great

Title: Re: My savage tracker....ing
Post by Dave on 06/06/15 at 03:52:27

Looks like a great start....and also like you will be making regular fuel stops!

Is that a "living room" project?

Title: Re: My savage tracker....ing
Post by Superxin on 06/06/15 at 16:45:48

@dave yes..you are right.

Title: Re: My savage tracker....ing
Post by LANCER on 06/07/15 at 12:48:21

I like that name ... ZUK ! ;) ;D 8-)

Title: Re: My savage tracker....ing
Post by justin_o_guy2 on 06/07/15 at 16:38:03

It otta be light , if you jack the motor, get the exhaust breathing a little, it's gonna be right quick.
Unless you're a big guy , you could see under six seconds to sixty.
I'm a supporter of fork brace s, the T-kat would look good on that style of build. Superbrace is a bit too refined looking. And costs more.
I had a Stage One cam, jetted the cab, Supertrapp with 14disks, but I'd try a Dyna if I had to do it over.
I'm Thinking,no dyno ,no proof, but I THINK the OEM airbox would smooth out the intake pulses and result in better performance. People spend time on exhaust, and it's gonna be shoved out, by a piston. IF there is no reflected pulse to jump back into the cylinder before the valve shuts, it's a winner. Intake relies on a low pressure zone being filled by atmospheric pressure. When the volume between the filter and carb is equal or larger than the cylinder volume it( according to what little I've found ) makes it easier for the engine to gulp it in.
Imagine an intake that has the right volume to create a pressure wave AT the carb just as the intake valve opens up at the engines torque peak RPM..

Ifi was young and adventurous id probably get some crap together and build a variable volume intake.

Title: Re: My savage tracker....ing
Post by Superxin on 06/16/15 at 18:02:47

the photo by yestday.
and i need one small battery....my battery is 12V20ah,gan i use 122V 14AH[ch65311]

Title: Re: My savage tracker....ing
Post by Superxin on 06/16/15 at 18:08:30

[ch12290][ch12290][ch12290][ch12290]it's 12V14AH now...

Title: Re: My savage tracker....ing
Post by Superxin on 06/21/15 at 22:37:07

[ch25105][ch21487][ch20197][ch29992]12V14AH[ch30340][ch30005][ch27744][ch21527]

Title: Re: My savage tracker....ing
Post by verslagen1 on 06/21/15 at 22:49:51

4C5E4E545B4E360 wrote:

the photo by yestday.
and i need one small battery....my battery is 12V20ah,gan i use 122V 14AH[ch65311]

yes, 14 is standard

but here's one even smaller...

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1259644714

Title: Re: My savage tracker....ing
Post by Superxin on 06/23/15 at 19:55:20

cool .china have this battery