SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Foot Pegs---Which to buy?
/cgi-bin/YaBB.pl?num=1431636545

Message started by Chipop73 on 05/14/15 at 13:49:05

Title: Foot Pegs---Which to buy?
Post by Chipop73 on 05/14/15 at 13:49:05

I just recieved my new 6" Forward Control plates from Mule on this Forum/Board.
They look great, and I am excited about getting them installed.
I need to replace my original foot pegs. They are bent terribly by previous owner driving/dropping drunk...him and his college buddies.
I just want footpegs...nothing fancy. If anything, a little longer and fatter, as my feet/boots are rather wide.
What can I purchase that will bolt on? I'm not much of a fabricator... :-?
Thanks all,
Tim

Title: Re: Foot Pegs---Which to buy?
Post by EJID on 05/15/15 at 07:33:23

Here's a good link about footpegs from the Tech Section.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1245903031

I used some ISO pegs that were a take off from a HD. Simple replacement after a quick trip to Lowes for some minor hardware.

Title: Re: Foot Pegs---Which to buy?
Post by Bubba on 05/15/15 at 11:29:25

So it's time to get new pegs...after 5 years of looking at my bent ones...lol

anyway, would these work with the described mods?
http://www.ebay.com/itm/New-ISO-Anti-Vibe-Passenger-Foot-Pegs-Harley-Sportster-XL-Softail-Dyna-Customs-/321755253945?hash=item4aea1b8cb9&vxp=mtr
thx!

Title: Re: Foot Pegs---Which to buy?
Post by EJID on 05/18/15 at 07:26:38


566176767525242C27140 wrote:
So it's time to get new pegs...after 5 years of looking at my bent ones...lol

anyway, would these work with the described mods?
http://www.ebay.com/itm/New-ISO-Anti-Vibe-Passenger-Foot-Pegs-Harley-Sportster-XL-Softail-Dyna-Customs-/321755253945?hash=item4aea1b8cb9&vxp=mtr
thx!


Those look exactly like the ones that I picked up and put onto mine - & how I did mine...
An additional way to make HD pegs fit is to take the bolt that holds your stock peg with you and your new pegs into Lowes and root around until you find the right size replacement stainless allen head bolt and a brass collar that fits in the hole. You may need to add some stainless washers to fill some of the slop, but it is a heck of a lot easier than trying to drill out the hole on custom pegs.

Title: Re: Foot Pegs---Which to buy?
Post by Bubba on 05/18/15 at 07:40:57

Great! On order...
thx

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.