SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> CDI Ignitor plug wiring diag
/cgi-bin/YaBB.pl?num=1430941280

Message started by rockabilly on 05/06/15 at 12:41:19

Title: CDI Ignitor plug wiring diag
Post by rockabilly on 05/06/15 at 12:41:19

Guys (an any gals out there!) I need some help - I'm about to rewire my savage cafe racer - there's a post on the build on the forum somewhere- however now we've come to do it half the wires in the plug to the cdi igniter box have broken away and while the wiring diagrams are fine for where the wires go to they don't give me a pin out guide - can anyone supply me with either a photo of said plug showing the wires or have a pin out diagram? I had a look in the techy section and there is a pin out of a later model, but mines an 86 4 speeder and the connection is different and the wiring colours not the same so wanna make sure before I end up blowing the little black box!! :'(

C'mon guys HEEELLLLLP! Just found that Suzuki don't even have the loom available as a spare for this years bike so unless a good soul on here can help me with a picture I'm well and truly stuffed!
:'(