SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Tachometer Wiring /cgi-bin/YaBB.pl?num=1430929531 Message started by KennyG on 05/06/15 at 09:25:31 |
Title: Tachometer Wiring Post by KennyG on 05/06/15 at 09:25:31 I am trying to wire a Ryca Tachometer to my 2013 S40. How can I tell which terminal on the coil is negative? I have a cheap multi meter but I have never used it before. Which wire terminal on the horn is hot? Kenny |
Title: Re: Tachometer Wiring Post by Dave on 05/06/15 at 09:31:39 On the Savage....red is hot before the ignition switch, orange is hot after the switch. Orange with a stripe goes through a switch and will only have power if the switch is on. Other colors indicate the power being distributed to lights, ign. etc. For the coil the orange/white is the power....the black/yellow is from the ignition module and is what the tach should be connected to. Here is a link to the wiring diagrams so you can search the colors and what they do. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1294779818 |
Title: Re: Tachometer Wiring Post by KennyG on 05/06/15 at 11:05:35 Dave, Thank You Very Much! I had everything hooked up as you posted. I will turn the power on and start it up. Everything works as advertised. Kenny G |
Title: Re: Tachometer Wiring Post by botticelli on 05/06/15 at 13:48:13 Awesome! |
Title: Re: Tachometer Wiring Post by KennyG on 05/06/15 at 13:52:52 Even a blind squirrel finds an acorn once in a while. Kenny G |
Title: Re: Tachometer Wiring Post by Kris01 on 05/06/15 at 18:33:39 Rule of thumb: Any wire with a white tracer comes out of a switch. ;) |
Title: Re: Tachometer Wiring Post by Todd James on 05/06/15 at 20:34:34 KennyG: Here's the link to my post on installing the RYCA tach on a stock S40. It has a picture showing the tach wires connected to the coil. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1409022095 |
Title: Re: Tachometer Wiring Post by KennyG on 05/06/15 at 20:43:04 Todd, I did see your post quite awhile ago and couldn't find it when I was looking for it this morning. Now I saved your wiring pic. I really admire the bracket that you made to hold the tachometer. Kenny G |
Title: Re: Tachometer Wiring Post by Todd James on 05/06/15 at 21:13:58 Thanks, Kenny I like working with aluminum stock from the hardware store because it doesn't require special tools or machinery to make a lot of things. A hacksaw, drill, and a file will suffice for small projects. You can even polish it to a mirror finish if the job calls for that. |
Title: Re: Tachometer Wiring Post by thumperclone on 05/06/15 at 21:40:18 4A646F4273607269010 wrote:
hey that's my line!!! |
Title: Re: Tachometer Wiring Post by KennyG on 05/06/15 at 21:57:59 Thumper, But, I am much older than you. Kenny G |
Title: Re: Tachometer Wiring Post by thumperclone on 05/06/15 at 22:09:32 MUCH ?? 12/22/54 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |