SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> RYCA CS1 speedo placement - Cable length???????
/cgi-bin/YaBB.pl?num=1429737322

Message started by swing69 on 04/22/15 at 14:15:21

Title: RYCA CS1 speedo placement - Cable length???????
Post by swing69 on 04/22/15 at 14:15:21

My as bought CS1 had the double guages on individual "Y" brackets. I don't know what speedo cable was used. Stock or RYCA provided.

If I remount the speedo at a higher up angle rather than flat, will the cable reach properly? do I need a new cable or an adapter?

I guess this is for Gary in NJ or Gerry

sorry...just re-read one of Gary's post. I'll need NEW cable. Gary: where, what, how much? I need details to purchase......

Title: Re: RYCA CS1 speedo placement - Cable length??????
Post by Dave on 04/22/15 at 18:34:20

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1426722085/11#11

Title: Re: RYCA CS1 speedo placement - Cable length??????
Post by Gary_in_NJ on 04/23/15 at 05:02:33

Mike,

I used the RYCA supplied speedo cable and it is a perfect fit. I did put a ~20 degree bend on my lower bracket so the cable would clear the head light bucket. There are photos in my build thread.