SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> rear axle nut size /cgi-bin/YaBB.pl?num=1428875107 Message started by savagerider87 on 04/12/15 at 14:45:07 |
Title: rear axle nut size Post by savagerider87 on 04/12/15 at 14:45:07 what size is the rear axle nut? |
Title: Re: rear axle nut size Post by verslagen1 on 04/12/15 at 15:46:40 go to the index (link below) find off beat... find rear axle... |
Title: Re: rear axle nut size Post by justin_o_guy2 on 04/12/15 at 16:45:55 HF, digital dial calipers, push of a button,, inches or metric. |
Title: Re: rear axle nut size Post by oldNslow on 04/12/15 at 17:07:58 You are supposed to use a 24mm on the nut, but a twelve point 15/16" box wrench or socket will fit good enough. |
Title: Re: rear axle nut size Post by savagerider87 on 04/13/15 at 09:26:16 thanks guys, but I used a good size adjustable wrench... worked like a charm. :) |
Title: Re: rear axle nut size Post by hotprops on 04/14/15 at 14:37:24 i would recommend a 6 point 15/16th, 1/2 inch drive socket usually found as a impact socket |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |