SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> RYCA shock question /cgi-bin/YaBB.pl?num=1428345301 Message started by swing69 on 04/06/15 at 11:35:01 |
Title: RYCA shock question Post by swing69 on 04/06/15 at 11:35:01 Anyone pull off the top and bottom shrouds from the RYCA shocks? I would think they would look more like the old 70s shocks without them rather than sportster shocks...... :P |
Title: Re: RYCA shock question Post by verslagen1 on 04/06/15 at 11:55:41 I took them off stock shocks. they were bent and pretty rusty. so I used a racheting tie down looped it thru the coils on both sides and around the bottom. tightened it up till the tins were loose then cut them off with a pair of tin snips. |
Title: Re: RYCA shock question Post by haylo on 04/06/15 at 12:10:56 I removed the bottom cap...I can email a pic if you like. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |