SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Intake manifold boot /cgi-bin/YaBB.pl?num=1426828107 Message started by jeffsavage on 03/19/15 at 22:08:27

Title: Intake manifold boot Post by jeffsavage on 03/19/15 at 22:08:27 replacing all the gaskets in my 95 savage. All is going well so far, only problem is that my carb intake manifold boot is busted around one of the bolt holes, and cracked further through while removing it completely. Can't find one for a 95 anywhere(unless I'm not looking in the right place). Have found an 86 boot and a 99....will either fit a 95. They look identical just want to be sure.

Title: Re: Intake manifold boot Post by Dave on 03/20/15 at 03:44:27 Yep....same for all years.

Title: Re: Intake manifold boot Post by savagerider87 on 03/20/15 at 11:39:28 same thing with tanks. I have a 2011 tank on my 87 :)

Title: Re: Intake manifold boot Post by jeffsavage on 03/20/15 at 16:59:00 Very much appreciated!

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.