SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Wiring help
/cgi-bin/YaBB.pl?num=1426034688

Message started by corey v84 on 03/10/15 at 17:44:48

Title: Wiring help
Post by corey v84 on 03/10/15 at 17:44:48

well I want to remove the decomp system, both safety's, and have a simple wiring harness, just what it needs run and have taillight and brake light..anyone have a simple diagram? I know I can search but didn't see what I was looking for

Title: Re: Wiring help
Post by Serowbot on 03/10/15 at 17:51:30

Try the link to the Tech Section...
It's in my sig...
...and it has a table of contents...
http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1173898705

Title: Re: Wiring help
Post by corey v84 on 03/10/15 at 18:34:59

Will this work my bike, mines a 06

Title: Re: Wiring help
Post by Kris01 on 03/10/15 at 19:58:24

They're all pretty much the same but the wiring colors may be different.

Title: Re: Wiring help
Post by corey v84 on 03/19/15 at 15:24:02

Ok so what I'm trying to understand is how to do it..do I cut everything out and start all over or take the harness and go through it?? Would be nice if someone made a step by step on how to do this, I would even donate the harness to do so

Title: Re: Wiring help
Post by justin_o_guy2 on 03/19/15 at 15:33:44

Unless you know what you're doing be careful about hacking on the harness.
Never throw anything away before you've achieved the goal.
Do you have tools for harness work?

Title: Re: Wiring help
Post by Dave on 03/19/15 at 16:14:37

464A57405C531D11250 wrote:

Would be nice if someone made a step by step on how to do this, I would even donate the harness to do so

Well....why shouldn't that someone be you?

Title: Re: Wiring help
Post by mechanikhan on 03/19/15 at 16:45:15

If you are going to do any wiring, I recomend having a manual in front of you. The Clymers manual shows the wires in color. Spend some time to familiarize yourself with it before you change anything.

Title: Re: Wiring help
Post by corey v84 on 03/19/15 at 16:46:02

I would Dave but I'm not good at doing that, so pretty much just go wire by wire? Or start from scratch? My dad loves electrical so he is gonna help..

Title: Re: Wiring help
Post by justin_o_guy2 on 03/19/15 at 17:04:55

I'd get a harness, modify it, install it...