SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Head Plug Replacement
/cgi-bin/YaBB.pl?num=1424879376
Message started by bobthekerr on 02/25/15 at 07:49:36

Title: Head Plug Replacement
Post by bobthekerr on 02/25/15 at 07:49:36
So...since Verslagen doesn't currently have these available until further notice, does anyone have any links to someone or somewhere that carries them that are better than the OEM plugs?

Title: Re: Head Plug Replacement
Post by Dave on 02/25/15 at 08:08:57
Suzuki or Verslagen are the only options....unless you want to make your own.

I am not sure the new plugs from Suzuki aren't adequate - the real issue seems to be that they need a sealant applied to be durable, and for some reason a sealant was not used at the factory or the repair shops.

Use a new factory plug, install a sealer, and most likely you will be fine for a long time.

Title: Re: Head Plug Replacement
Post by bobthekerr on 02/25/15 at 08:17:14

457E7364757962647F777A65160 wrote:
Suzuki or Verslagen are the only options....unless you want to make your own.


:-X

Title: Re: Head Plug Replacement
Post by bobthekerr on 02/25/15 at 08:28:22

5A616C7B6A667D7B6068657A090 wrote:
Suzuki or Verslagen are the only options....unless you want to make your own.

I am not sure the new plugs from Suzuki aren't adequate - the real issue seems to be that they need a sealant applied to be durable, and for some reason a sealant was not used at the factory or the repair shops.

Use a new factory plug, install a sealer, and most likely you will be fine for a long time.


Thanks Dave!!! Can I use the same sealant as the kind used for the head assembly?

Title: Re: Head Plug Replacement
Post by Dave on 02/25/15 at 08:48:19
Yes, I used the Suzuki sealant and it seems to be working fine.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.