SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Fender Strut Bolts /cgi-bin/YaBB.pl?num=1424108182 Message started by KennyG on 02/16/15 at 09:36:22 |
Title: Fender Strut Bolts Post by KennyG on 02/16/15 at 09:36:22 Are the bolts holding the Fender Struts to the fender the bolts that I have seen mentioned when changing tires? Somewhere on the forum I have seen something about replacing the hex head mounting bolts with Button Head Allen Bolts. Since I have to remove one of the struts to put on a new turn signal I thought I would change the bolts if they are the ones referred to when going to a slightly bigger rear tire. Kenny G |
Title: Re: Fender Strut Bolts Post by Dave on 02/16/15 at 10:02:37 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1423796703 |
Title: Re: Fender Strut Bolts Post by KennyG on 02/16/15 at 10:35:19 Dave, Thank you. I picked up the sizes from the link that you posted. "M8-1.25 x 25 for the short ones. The longer ones it depends on if you have the side rails that support the sissy bar. They will be M8-1.25 x 40 or 45." It is the Fender Strut Bolts that some times need changing for larger tires. Kenny G :) |
Title: Re: Fender Strut Bolts Post by Art Webb on 02/17/15 at 15:49:02 yes |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |