SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Sissy Bar without Rails
/cgi-bin/YaBB.pl?num=1423851033

Message started by PMo85 on 02/13/15 at 10:10:33

Title: Sissy Bar without Rails
Post by PMo85 on 02/13/15 at 10:10:33

Anyone know of a product or way to put a Sissy Bar on without the rails on the fender?

Title: Re: Sissy Bar without Rails
Post by Steve H on 02/14/15 at 08:27:09

Years ago they used to attach to the shock mounts and whatever holes were available far back on the frame. Since the most rearward thing on our frames is the shock mounts, you might be able to use some of the holes in the fender for the rearward mount. That is, if you still have the stock fender.

Title: Re: Sissy Bar without Rails
Post by justin_o_guy2 on 02/14/15 at 09:57:46

License plates on these bikes tend to break. I've seen the fender swing violently under acceleration. Would a sissy bar damp that? We have not had reports that a sissy bar made it worse, but IDK if any have been installed without the OEM fender braces. Best I can tell the fender only gets crazy at a certain RPM range and then only under hard acceleration,,which doesn't exactly make sense to me,but I was only able to see it happening once and my daughter was accelerating away from me and she was All Over it..