|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> fuse /cgi-bin/YaBB.pl?num=1423501363 Message started by Boogieman on 02/09/15 at 09:02:42 |
|
Title: fuse Post by Boogieman on 02/09/15 at 09:02:42 can i use these instead of them blade style fuses? |
|
Title: Re: fuse Post by oldNslow on 02/09/15 at 09:07:46 4F42424A4448404C432D0 wrote:
Yes. |
|
Title: Re: fuse Post by Dave on 02/09/15 at 09:14:06 Yes - but be aware that it might be a bit harder to get a replacement fuse when you need one. Most convenient stores have the flat ones...but not the old tube ones. And just about every new car made uses the flat blade ones.....and most fuse panels in new cars have a few extra ones clipped to them....so you could borrow a spare fuse from just about anyone. You can get those wire-in fuse holders with the flat blade fuses. |
|
Title: Re: fuse Post by Boogieman on 02/09/15 at 09:34:01 thnx guys. u make a good point dave. i've seen the wire in blade types. I guess I was attempting to go for something less bulky. |
|
Title: Re: fuse Post by old_rider on 02/09/15 at 09:39:51 Something like these are cheap and easy http://www.ebay.com/itm/QZO-10pcs-5A-Middle-Fuse-Holder-with-Cable-for-Car-Boat-Truck-ATC-ATO-Blade-/131059288779?pt=LH_DefaultDomain_0&hash=item1e83be0acb there are also enclosed ones http://www.ebay.com/itm/14AWG-Wire-In-line-Car-Automotive-Blade-Fuse-Holder-Fuseholder-20A-/221541731938?pt=LH_DefaultDomain_0&hash=item3394ea8e62 |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |