SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> clutch cover gasket
/cgi-bin/YaBB.pl?num=1422433254

Message started by anebv8 on 01/28/15 at 00:20:54

Title: clutch cover gasket
Post by anebv8 on 01/28/15 at 00:20:54

I need to replace my clutch cover gasket,it's an '86 650,on the frame, it say's the bike is a NP41A,all I can find on ebay is for NP41B. My question is...is there a differance? Going to get a price from the stealership and I know that I'll have an in depth discussion ( as with every part I've bought from them for it ) and still walk off saying my butt knows more than them :) so before I go in and look like a prat,I'd like to know ;)

Title: Re: clutch cover gasket
Post by Dave on 01/28/15 at 03:50:43

Weird - but the factory parts diagram shows 2 gaskets as well. I don't know of any actual change to the engine case or clutch cover - so either gasket should work.

http://www.hondaofflorence.com/fiche_section_detail.asp

I would use a later gasket.....something must have been improved, although the earlier gasket does not seem to have been replaced with the later one.

Title: Re: clutch cover gasket
Post by justin_o_guy2 on 01/28/15 at 08:34:57

Maybe they didn't have the preapplied stickum on the early gasket?
I wonder if both gasket numbers are available. I'd be happier if the old number is not available, But, if it is, I'd wanna talk to someone who has both and ask them to see if they can see a difference.

Title: Re: clutch cover gasket
Post by anebv8 on 01/28/15 at 21:21:31

thanks guys...never got to stealership today,will try again tomorrow,but will post with what I come up with :)