SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> cleaning up wires
/cgi-bin/YaBB.pl?num=1421692408

Message started by Boogieman on 01/19/15 at 10:33:26

Title: cleaning up wires
Post by Boogieman on 01/19/15 at 10:33:26

can i mount the finned thingy directly on top of the magic sh!t box? they are already sort of primed to fit together with some fat zip ties.

Title: Re: cleaning up wires
Post by verslagen1 on 01/19/15 at 11:47:56

I wouldn't, the rectifier will generate some heat.
not good for the magic sh!t box.

Title: Re: cleaning up wires
Post by TC on 01/19/15 at 23:15:23

I'm assuming you painted this? What did you use?

Title: Re: cleaning up wires
Post by Boogieman on 01/20/15 at 05:39:59

ya...that was gonna be my next question is should i take the finish off. it was sandblasted, primed with etch primer, then painted with a two-part automotive black. i've never noticed the thing getting that hot. i mean, its basically in open air. my bikes pretty lean. i think i will mount the two with something in between so air can flow and they dont touch.

Title: Re: cleaning up wires
Post by justin_o_guy2 on 01/20/15 at 05:49:44

Aluminum plate, lamp stem parts, I can envision a ton of ways.

Title: Re: cleaning up wires
Post by Boogieman on 01/20/15 at 10:47:51

right, something small, lightweight & strong, to let air flow between