SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> ignition coil /cgi-bin/YaBB.pl?num=1421535293 Message started by Boogieman on 01/17/15 at 14:54:53 |
Title: ignition coil Post by Boogieman on 01/17/15 at 14:54:53 so I'm looking at a couple of different electrical schematics. 1 is the schematic originally used for my motorcycle and the other is the one I'm going to use to wire it up now without all the nonsense on it. I want to change the way the ignition coil is mounted to the bike but I don't know much about why it's mounted the way it is. It looks like it's either grounded or insulated from the frame,, I can't see it being grounded because the spark plug needs to be grounded on one side I don't know you tell me.?. the schematic basically shows -'insulated from- which is great but is there a minimum distance? i feel like there should be some room around the casing or at least the terminals. |
Title: Re: ignition coil Post by verslagen1 on 01/17/15 at 16:36:29 both primary and secondary are connected to +battery. primary goes to ground thru the TCI(aka CDI) or magic sh!t box. secondary goes to ground thru sparky. the frame may need to be grounded to prevent noise... not sure. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |