SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Speedo fitment /cgi-bin/YaBB.pl?num=1421380247 Message started by mongo on 01/15/15 at 19:50:46 |
Title: Speedo fitment Post by mongo on 01/15/15 at 19:50:46 I thought i remember reading a post somewhere about the differences between a 87 speedo mount on the tank & the mount on newer models. Has anyone fitted a older (1987) on a newer tank? just trying to find out what i need to do, before i buy a newer tank. |
Title: Re: Speedo fitment Post by verslagen1 on 01/15/15 at 19:57:08 none that I know of. |
Title: Re: Speedo fitment Post by mongo on 01/15/15 at 20:03:01 ok, i s'pose that I'll just have to find out, not in a rush. Just got a bunch of little parts in so that should keep me busy for a few hours.... it would be a learning experience.... |
Title: Re: Speedo fitment Post by Dave on 01/16/15 at 09:35:51 The only change I am aware of with the speedometer...is the side stand light. Early speedometers had a light that can on when the side stand is down. Later bikes don't have that light (However the speedometer may still have the hole for it with a plastic plug inserted). |
Title: Re: Speedo fitment Post by v-pilot on 01/16/15 at 14:28:45 I'm pretty sure the S40 has a different cover plate than the LS650 as Ryca has two different plates...old style and new style. But it's only the shape of the plate |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |