SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Will this gasket set work on my '06?
/cgi-bin/YaBB.pl?num=1421182335

Message started by Bubba on 01/13/15 at 12:52:15

Title: Will this gasket set work on my '06?
Post by Bubba on 01/13/15 at 12:52:15

http://www.ebay.com/itm/86-98-SUZUKI-LS650-ENGINE-GASKET-SET-NEW-CI-3049M/141382557741?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20131017132637%26meid%3D633cfd5b9f6941d6a6e7011df06e6c63%26pid%3D100033%26rk%3D2%26rkt%3D4%26sd%3D271733313737

Title: Re: Will this gasket set work on my '06?
Post by Dave on 01/13/15 at 13:28:44

The shape looks correct....can't verify the quality.

The stock Suzuki parts have a sealer applied in specific locations, and most aftermarket gaskets don't. The aftermarket ones might work fine..dunno!

Title: Re: Will this gasket set work on my '06?
Post by verslagen1 on 01/13/15 at 13:50:17

IMHO... yes.
But in no way does this have all of the gaskets in the $100 oem set.
It has the main ones, clutch, stator, gear shift, cylinder base and head gasket. but only a few of the washers. does look like in has the valve seals.

that being said, it sourced in japan, more likely to have the same mfrs as the oem set.

Title: Re: Will this gasket set work on my '06?
Post by Bubba on 01/13/15 at 13:59:36

Thx guys!
It looks to have pretty much what I need...just wasn't sure about the years although I know it really hasn't changed much since the 80's...lol

I once ordered a set for a rebuild I did for someone and the head gasket had a weird grommet on one of the holes...I ended up drilling it out.
thx again!

Title: Re: Will this gasket set work on my '06?
Post by Dave on 01/14/15 at 03:56:22

If/when you get that set....how about doing a review and post it in this thread. We all could use a source of cheaper gaskets....especially the clutch side where we need to look at the Cam Chain tensioner occasionally.