SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Carb slide plate dimple /cgi-bin/YaBB.pl?num=1420908349 Message started by 49mack on 01/10/15 at 08:45:49 |
Title: Carb slide plate dimple Post by 49mack on 01/10/15 at 08:45:49 Regarding the plate on top of the carb slide that holds the needle in place, does the dimple face up or down? Thanks! |
Title: Re: Carb slide plate dimple Post by verslagen1 on 01/10/15 at 08:58:41 dimple down, keeps the washer from sticking to it. |
Title: Re: Carb slide plate dimple Post by 49mack on 01/10/15 at 09:11:22 Got it. Thanks, Verslagen! |
Title: Re: Carb slide plate dimple Post by justin_o_guy2 on 01/10/15 at 23:35:47 Isn't there a lump on the other side? If the dimple is on bottom, is there a lump poking up? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |