SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Ryca Shocks /cgi-bin/YaBB.pl?num=1416169488 Message started by farmerpete on 11/16/14 at 12:24:48 |
Title: Ryca Shocks Post by farmerpete on 11/16/14 at 12:24:48 I'm hoping to replace the stock shocks on my 2007 S40 over the winter. On Ebay I see various shocks available including some 13" Ryca shocks. I weigh 185 and am 6'0 tall, with a aging back. Are the Ryca shocks a good idea, I think they are approximately $166.00 on Ebay. I'm trying not to spend too much. Thanks. Pete |
Title: Re: Ryca Shocks Post by Serowbot on 11/16/14 at 13:53:43 Suzuki Intruder 800 shocks will fit... They are about 12.25"... and can be had for cheap on E-Bay... |
Title: Re: Ryca Shocks Post by Kris01 on 11/16/14 at 19:04:37 Just for a comparison... What is the length of the stock shocks? I could go measure but I don't know where the manufacturers are measuring from. |
Title: Re: Ryca Shocks Post by Dave on 11/17/14 at 03:28:53 19203B216263520 wrote:
The stock shocks are 10.5".....you measure from the center of the mounting bolts on each end (top & bottom). Somewhere around 12" - 12.5" is about the most you want without the stock fender looking goofy. The Cafe' bikes are using 13.5" and that is about the longest you can go without get into belt/chain tension problems as the swing arm is at a pretty steep angle and vertical movement changes the belt/chain tension. |
Title: Re: Ryca Shocks Post by Serowbot on 11/17/14 at 07:11:22 Intruder shocks... http://i600.photobucket.com/albums/tt82/serowbot/rIMG_0237_zpscc765c31.jpg Comparison... 10.5" to 12.5"... (that's my bike at an early stage of modding)... although the taller shock looks a little odd at rest, it drops a good bit when you get on it... and the ride is much better... http://p1.bikepics.com/2006%5C09%5C20%5Cbikepics-683713-full.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |