SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Ryca with solenoid
/cgi-bin/YaBB.pl?num=1415855729

Message started by Jeff71 on 11/12/14 at 21:15:29

Title: Ryca with solenoid
Post by Jeff71 on 11/12/14 at 21:15:29

Anyone do the CS-1 kit and keep the decomp solenoid AND the Ryca tank mount?
Jeff

Title: Re: Ryca with solenoid
Post by Dave on 11/13/14 at 04:08:30

There is not enough room for the solenoid when the tank is cut and lowered.
If there was room......RYCA would not have removed the solenoid. They tried to make their kit as easy as possible.

You would need to cut the bottom of the tank and make clearance for the solenoid if you wanted to keep it.

Title: Re: Ryca with solenoid
Post by bobert_FSO on 11/13/14 at 06:12:07

I no longer have a Savage to reference, but might it be possible to mount the solenoid somewhere else? Since the decomp is cable operated, it wouldn't need to be mounted in its original location. If you are the kind that likes to see your mechanicals visible, what about a bracket on the frame downtube to mount it there. Just thinking out loud.

Title: Re: Ryca with solenoid
Post by Jeff71 on 11/13/14 at 15:22:23

I was thinking putting it forward would work OR getting a longer cable and mounting the sol. back by the carb. Might be a good conversation piece. ;)
Jeff