SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Saddlebag set-up to share /cgi-bin/YaBB.pl?num=1415812623 Message started by rijopiatt on 11/12/14 at 09:17:03 |
Title: Saddlebag set-up to share Post by rijopiatt on 11/12/14 at 09:17:03 I just installed new saddlebags from The Leatherworks and wanted to give others an idea of an alternative bag installation: http://p1.bikepics.com/2014/10/31/bikepics-2705870-200.jpg I removed the stock tail lights and installed a "relocation kit" purchased from Drag Specialties and dual element, all metal bullet lights I purchased on Ebay. Later I discovered the same lights/parts can be purchased at the HD dealership, as they are used on Sportsters. BTW, the lights are turn signals AND tail lights. http://p1.bikepics.com/2014/10/31/bikepics-2705871-200.jpg I wanted to use Easy Brackets quick release system for the bags, but there isn't a unit sized for an S40's fender bracket bolt spacing. It would require drilling thru the chrome bracket which I preferred not to do. Consequently, I drilled thru the fender at the stock tail light hole in the bracket. I fabricated a stand-out from 1 1/4" stainless steel bar stock and used the hardware you see above. The upper assembly is an Easy Bracket's docking post. http://p1.bikepics.com/2014/10/31/bikepics-2705872-200.jpg Installed. BTW, I used a chrome spacer to fill the large diameter hole in the fender bracket. http://p1.bikepics.com/2014/10/31/bikepics-2705873-200.jpg Bag installed. Note key lock. Bracket is bolted thru the back of the bag. http://p1.bikepics.com/2014/10/31/bikepics-2705874-200.jpg http://p1.bikepics.com/2014/10/31/bikepics-2705875-200.jpg The finished product! FYI- My other bags are listed on Ebay as "Suzuki S40 saddlebags". I couldn't get the photos to download on Café ( ???). Check em out. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |