SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> ryca airfilter problem
/cgi-bin/YaBB.pl?num=1414259940

Message started by victorbsa on 10/25/14 at 10:59:00

Title: ryca airfilter problem
Post by victorbsa on 10/25/14 at 10:59:00

It is very difficult to get the round airfilter off the RYCA cafe bike. Plus I also hear that the ryca filter is too restrictive. Does anyone else use a foam air sock? I also saw an off set rubber intake mount for the cafe kit. I cannot find the pic of the bike now, so I don't know where they got it.
i find that eveything on the ryca is a pian to remove. Fortunately you don't have to move much.

Title: Re: ryca airfilter problem
Post by verslagen1 on 10/25/14 at 12:04:17

There's an elbow intake fitting for a few v twins that might work.
you'd need to check what carb it uses to see if it would mount to ours.

I think the one mentioned was a kawasaki

http://www.ebay.com/itm/1999-Suzuki-VZ800-Marauder-FRONT-AIRBOX-INTAKE-RUBBER-BOOT-/360713167466?pt=Motorcycles_Parts_Accessories&hash=item53fc2e226a&vxp=mtr

Title: Re: ryca airfilter problem
Post by HondaLavis on 10/25/14 at 20:56:48

What exactly is your end goal? The stock throat can be made to work:
http://i230.photobucket.com/albums/ee291/Lavis325CL/20130306_180407_zpse55bb74c.jpg

http://i230.photobucket.com/albums/ee291/Lavis325CL/20121008_131504_zps687c351a.jpg

Title: Re: ryca airfilter problem
Post by Dave on 11/06/14 at 04:28:15

Here is the RYCA part that is used on their street tracker.....

http://www.ebay.com/itm/Suzuki-Savage-S40-Silicone-Reducer-Elbow-Tracker-Ryca-Motors-/121396985199?pt=Motorcycles_Parts_Accessories&hash=item1c43d2fd6f&vxp=mtr

I think a better solution would be to install a small lithium ion battery, then cut down the RYCA airbox and install a longer sock filter or cone filter.