SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> wiring?
/cgi-bin/YaBB.pl?num=1413925042

Message started by Boogieman on 10/21/14 at 13:57:18

Title: wiring?
Post by Boogieman on 10/21/14 at 13:57:18

so i wanna use this wiring setup for my but I'm still having problems identifying stuff. for instance:

ignitor - is this called something else?
RBLS - where and what is this?
Where does the magic sh!t box go in this diagram?

Title: Re: wiring?
Post by Boogieman on 10/21/14 at 13:59:22

also what is this and do i need it?

Title: Re: wiring?
Post by Boogieman on 10/21/14 at 14:01:36

also is there a diagram showing how this stuff goes back together?

Title: Re: wiring?
Post by Boogieman on 10/21/14 at 14:02:21

and this

Title: Re: wiring?
Post by verslagen1 on 10/21/14 at 14:09:18

3934343C323E363A355B0 wrote:

so i wanna use this wiring setup for my but I'm still having problems identifying stuff. for instance:

ignitor - is this called something else? AKA magic sh!t box
RBLS - where and what is this? AKA rear brake light switch
Where does the magic sh!t box go in this diagram?

Mahalo

Title: Re: wiring?
Post by verslagen1 on 10/21/14 at 14:10:28

303D3D353B373F333C520 wrote:

also what is this and do i need it?

double ended diode, it's for the kickstand and neutral switch.

Title: Re: wiring?
Post by verslagen1 on 10/21/14 at 14:11:35

515C5C545A565E525D330 wrote:

also is there a diagram showing how this stuff goes back together?

it's a puzzle... only goes together 1 way (don't trim the corners)

Title: Re: wiring?
Post by verslagen1 on 10/21/14 at 14:12:15

616C6C646A666E626D030 wrote:

and this

goes between the head and frame.

Title: Re: wiring?
Post by justin_o_guy2 on 10/22/14 at 02:14:21

If you took it apart, then,next project, spend time planning how to organise parts. Put bolts back in holes,taped to parts, whatever it takes to make going back together Not a puzzle.

Title: Re: wiring?
Post by Boogieman on 10/22/14 at 08:12:17

jog2 - too late for labeling man, that goes in the beginning. i disassemble the entire bike very maliciously chasing a gremlin. there r only so many parts and im learning all about 'em right now. it'll b rad when she's done. no saftey sh!t, no signals... the real deal is gonna b getting a sissy bar on back. my dummy brother hacked the back of the bike off. i gotta bend one long solid piece of 5/8th steel bar a bunch of different ways and make the open ends fit to the inside of the main tubes under the seat. gotta cut out them cross pieces and weld in new ones with the sissy bar.

Versy - thnx! i new that thing was some sort of diode but didnt know what for. jst needed a reminder on them other parts.

Title: Re: wiring?
Post by justin_o_guy2 on 10/22/14 at 19:46:36

Heads up,, get a length of heavy wire, mock up the shape.
A piece of square tubing with bolts thru it makes a,bending jig. If you don't have a cutting torch, a MAPPers torch would have to be the next best tool,, unless you have a forge,, some charcoal and a breeze,,, HOT metal.

Title: Re: wiring?
Post by Boogieman on 10/22/14 at 22:58:11

lol im all blacksmithing in my backyard. you're right on about the mock up, very helpful indeed. i did one initially with some 12ga solid core but i need something sturdier. my brother bent a piece of 5/8ths with a torch and vice to put as a temp behind my seat so i wudnt fly off. looks pretty rad. not easy to bend.