SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> The next project /cgi-bin/YaBB.pl?num=1413696673 Message started by verslagen1 on 10/18/14 at 22:31:12 |
Title: The next project Post by verslagen1 on 10/18/14 at 22:31:12 I got a cap that was jammed. After driving the cylinder out. I made a replacement out of aluminum. I still have to machine the pegs on the backside. And another problem is how to keep it in. http://www.savageriders.com/verslagen/CamChainClub/keyless1.jpg |
Title: Re: The next project Post by old_rider on 10/19/14 at 00:13:12 Cut a groove for an "O"Ring, and pop it in. |
Title: Re: The next project Post by verslagen1 on 10/19/14 at 08:43:38 34373F29323F3E295B0 wrote:
Hmmm... not a bad idea. |
Title: Re: The next project Post by verslagen1 on 10/21/14 at 19:45:05 worked like a charm... now for the fun part, mill the pins on the backside. |
Title: Re: The next project Post by old_rider on 10/21/14 at 23:11:27 LOL, going outside to see what mine looks like from the inside, and to see how easy it is to remove. I personally don't worry about gas being stolen from my bike, its stored in the garage and never left alone for very long. When I park it, I always leave it in view of a building window, hoping thieves won't go thru my two unlocked side bags (they only have crappy tool set and some fix a flat at present). Maybe you could shape that top like a gear, so it would be easier to grip and turn with gloves on. |
Title: Re: The next project Post by Jeff71 on 10/21/14 at 23:22:15 Or a cam lobe would look pretty sweet. Jeff |
Title: Re: The next project Post by verslagen1 on 10/23/14 at 22:48:07 Machined the pins on the back and assembled. a little tuff to assemble but once it's together, works great. http://www.savageriders.com/verslagen/CamChainClub/keyless2.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |