SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> clutch cover gasket
/cgi-bin/YaBB.pl?num=1413156596

Message started by brownie17 on 10/12/14 at 16:29:55

Title: clutch cover gasket
Post by brownie17 on 10/12/14 at 16:29:55

Should have my Verslavy back Tuesday. I got the clutch cover gasket but i want to make sure I have the right one. It looks right but it seems like there's more to the gasket than needs to be. The extra part at the bottom seems unnecessary. Is it the correct one?

Title: Re: clutch cover gasket
Post by Dave on 10/12/14 at 16:59:23

Yup. ;)

Title: Re: clutch cover gasket
Post by Oldfeller on 10/12/14 at 16:59:30

Brownie,

The "big holes" in the bottom are to allow the side case to drain completely at oil change time.

The extra width of material at the bottom is there to give the gasket "locational stability" while you tighten it down.

All is well with the gasket.

Title: Re: clutch cover gasket
Post by justin_o_guy2 on 10/12/14 at 17:19:59

Isnt that the top O th gas kit? Isnt the little bead O goo along the gas kit up in the top O th pic actually the bottom?

Title: Re: clutch cover gasket
Post by brownie17 on 10/12/14 at 17:37:27

I'm not by my motorcycle now and I might be wrong but I believe the little bead goes along the top.

Title: Re: clutch cover gasket
Post by justin_o_guy2 on 10/13/14 at 09:15:10

I soldmine a year ago, maybe more,, Memories fade,,