SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> EBC clutch plates?
/cgi-bin/YaBB.pl?num=1410403178

Message started by wolfsgrin on 09/10/14 at 19:39:38

Title: EBC clutch plates?
Post by wolfsgrin on 09/10/14 at 19:39:38

About to install these this weekend. Has anyone installed these? just wondering how they fit in. One plate looks like the stock ones and the rest of the ebc plates have a grooove around the outer edge. All it says on the box is to soak them in oil for like 3-4 hours before installation. will try to get some pics up so you can see the groove that I'm talking about.

Title: Re: EBC clutch plates?
Post by Spamy on 09/10/14 at 20:50:08

Ive used EBC clutches many times. They have always been fine.

Are the grooves like the ones in this pic?

http://www.bitzfor.co.uk/ebay/bitzforbikes/listings/ebcclutchkit/CK_plate.jpg

Title: Re: EBC clutch plates?
Post by wolfsgrin on 09/10/14 at 21:28:33

yep those are the grooves on the outside tabs. the stock ones don't have these. Also I believe one of the ebc plates doesn't have grooves. Is there a certain way to install these or just pop them in like the others?

Title: Re: EBC clutch plates?
Post by Spamy on 09/11/14 at 08:53:19

As far as I know those marks are just for reference if you want to keep them indexed for removal later for inspection.

Also, for some reason I thought this clutch had one either thin clutch or friction plate. That might be the reason for the one unmarked.