SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Thanks to Dave - carb float measurement. /cgi-bin/YaBB.pl?num=1409958462 Message started by 49mack on 09/05/14 at 16:07:41

Title: Thanks to Dave - carb float measurement. Post by 49mack on 09/05/14 at 16:07:41 I followed the entire saga when you were helping the guy from Italy. In it you described exactly how to measure float height. Thanks. The Haynes manual is very vague. I used your method and found mine to be around 23 or so. I raised them to 28. Can't wait for tomorrow to reinstall the carb and see if it will stop coughing and gagging at 64 mph. I sure appreciate all the knowledgable folk who contribute here. Thanks.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.