|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> I bought a carb kit but I'm not sure.... /cgi-bin/YaBB.pl?num=1409957604 Message started by Izzy on 09/05/14 at 15:53:24 |
|
Title: I bought a carb kit but I'm not sure.... Post by Izzy on 09/05/14 at 15:53:24 So I was going to take it in to get fixed at a shop. I have another topic about my Savage woes.... but anyways he said before I bring it in to just change out the o-rings. I bought a kit that in theory has the o-rings the guy was talking about. The question I have is where are these o-rings located? I basically took the whole thing apart looking for where these go. I'm not terribly mechanically inclined or else I feel like between the diagrams I looked at and photos I've seen I would have found it by now. http://i.ebayimg.com/00/s/Njc1WDc0Mw==/z/XIgAAOxyrrpThkZ3/$_35.JPG http://i.ebayimg.com/00/s/Njc1WDc0Mw==/z/XIgAAOxyrrpThkZ3/$_35.JPG |
|
Title: Re: I bought a carb kit but I'm not sure.... Post by Yoshi on 09/05/14 at 16:08:33 You shoul update your profile with your location then maybe someone from the forum would be willing to stop by and help you wrench on your bike. The rebuild kit is and easy thing to do |
|
Title: Re: I bought a carb kit but I'm not sure.... Post by verslagen1 on 09/05/14 at 16:11:46 I believe the o rings are extra. I've heard the little one goes on the idle mixture screw. But I've never seen one pulled out. |
|
Title: Re: I bought a carb kit but I'm not sure.... Post by Izzy on 09/05/14 at 16:25:15 When you said they are extra do you mean they just put them in there but they don't go to anything? Hopefully I didn't just buy this for nothing, the original gasket and the float needle thing looked just fine. Also I must be blind but I can't figure out how to edit my profile but if anyone is interested I'm in colorado springs haha. |
|
Title: Re: I bought a carb kit but I'm not sure.... Post by Yoshi on 09/05/14 at 19:16:06 Doesn't that little one go in the air mixture screw hole? Its the semi crush protector |
|
Title: Re: I bought a carb kit but I'm not sure.... Post by LANCER on 09/06/14 at 20:22:29 I could be wrong but the small o-ring in the photo does not look small enough to be the one that goes on the pilot screw, which is really tiny. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |