SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Tachometer installation /cgi-bin/YaBB.pl?num=1409762640 Message started by Andreas on 09/03/14 at 09:44:00 |
Title: Tachometer installation Post by Andreas on 09/03/14 at 09:44:00 Hi guys, I know that I should be asking the seller of the tachometer (bought it on ebay), but I've decided to ask you first as you might have much more experience on that. I bought this tachometer with the following wiring instructions: Black -> positive electrode Green -> Negative electrode Yellow/Black -> signal Orange -> positive lamp Blue -> negative lamp I connected the green and blue wires to the negative, black and orange to positive and the yellow/black on one of the coil's inputs. I've read that the signal should be connected to the negative input of the coil. This is my first question. How do I recognize the negative input? My second question is why the hell isn't working? :P The description says that is suitable for 1,2,4 cylinders and 4,2 stroke engines. I've noticed that if I invert the two inputs on the coil, the engine starts normally... The internal night lamp lids normally... |
Title: Re: Tachometer installation Post by Spamy on 09/03/14 at 09:56:18 Does this help at all? http://www.rycamotors.com/instructional/assembly_guides/RycaCS-1ElectricalWiringGuide.pdf |
Title: Re: Tachometer installation Post by EJID on 09/03/14 at 10:00:28 Maybe this will help too, didn't see the ryca post before I found this one. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1221683647 |
Title: Re: Tachometer installation Post by Andreas on 09/04/14 at 03:40:04 Ok guys thanks for the replies. I'll check these and let you know |
Title: Re: Tachometer installation Post by MnSpring on 09/05/14 at 18:21:34 I put one of these on: http://www.trailtech.net/digital-gauges/tto/tach-hour Cheep, Easy. Set to: "2" and, "low". |
Title: Re: Tachometer installation Post by thumperclone on 09/05/14 at 20:53:04 02211C3F3D2621284F0 wrote:
got one alike wrap the sender wire around the spark plug wire good for setting idle(after warm up!) cant read while under way very well |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |