SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Seat-Mod Bolt Dimensions
/cgi-bin/YaBB.pl?num=1408842754

Message started by philjayny on 08/23/14 at 18:12:34

Title: Seat-Mod Bolt Dimensions
Post by philjayny on 08/23/14 at 18:12:34

Hi all,

Anyone know the bolt dimensions for the seat mod? I hear a recommended length is 2", but since I'll be ordering the bolts online, I was wondering what the thread and diameter was?

Thanks!

Title: Re: Seat-Mod Bolt Dimensions
Post by HondaLavis on 08/23/14 at 18:44:48

Why would you bother ordering bolts online when you can run to your local Ace hardware and buy them for less than $1? Don't forget that you need some kind of spacer to actually raise up your seat. I used 1.75" long rubber stoppers that I simply drilled a hole in the middle of.

Something make sense to do online. Others are much easier to do locally. Take your stock bolts in to the hardware store to match the pitch and pick whatever length works for you. Too simple! ;)

Title: Re: Seat-Mod Bolt Dimensions
Post by luckylouie82 on 09/03/14 at 08:56:49

Does this mod work ok with the one piece seat? I envision it possibly flexing the back bolts too much.

Title: Re: Seat-Mod Bolt Dimensions
Post by EJID on 09/03/14 at 09:51:53

It does flex the one piece seat some, which makes lining those side bolts up a little more fun, but I've had it on mine for about 5 years without a single problem.