SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> K&n 52mm instead of 57
/cgi-bin/YaBB.pl?num=1407638132

Message started by Michael L on 08/09/14 at 19:35:32

Title: K&n 52mm instead of 57
Post by Michael L on 08/09/14 at 19:35:32

Im having some trouble finding a kn filter that fits, with the correct 57 mm in size.. If I use one with 52 mm and a reducing sleeve, would that have any negative effect on performance?

Title: Re: K&n 52mm instead of 57
Post by verslagen1 on 08/09/14 at 20:30:02

not hard to find if you know the part number

http://www.ebay.com/itm/Kn-Rc-1250-Cone-Air-Filter-/171409109380?pt=Motorcycles_Parts_Accessories&hash=item27e8c77184&vxp=mtr

Title: Re: K&n 52mm instead of 57
Post by Michael L on 08/10/14 at 06:22:36

Sorry I should have been more specific. It's not the flange that is the problem, but the size of the filter itself. Im looking for one that is cylindrical and not conical, that Will fit the space between the frame Where the Airbox was

Title: Re: K&n 52mm instead of 57
Post by HondaLavis on 08/10/14 at 15:29:09

The standard cone should fit there just fine. I used the stock intake throat and the cone shaped 57mm K&N. It works pretty well.

Here is my setup: http://i230.photobucket.com/albums/ee291/Lavis325CL/20121008_131504_zps687c351a.jpg

Title: Re: K&n 52mm instead of 57
Post by Michael L on 08/10/14 at 15:46:18

That looks pretty good hondalavis

That was my idea too, but have decided to try and fit a bigger cylindrical filter in the space Where the Airbox was sitting, with a 90 degree adaptor going up to the same original rubber tube as you used.